Dynavin DVN-MO150-V Adapter Skoda With Canton Soundsystem And Most Fibre Optics

Description

Important note for customers outside the EU!
Any applicable import duties, taxes and fees
are not in the item price or den
Shipping costs included.
The buyer is responsible for this
responsible for fees.
plug & play
Fiber optic / MOST adapter
for
Skoda and Volkswagen
with Canton or Dynaudio sound system
If you have an amplifier in your vehicle
ex works
have installed which is controlled via fiber optic cable,
so you can connect it to an aftermarket radio with the adapter
connect.
To do this, the front loudspeaker outputs are converted into a
Fiber optic signal converted and forwarded to the amplifier
given.
On the adapter itself, all you have to do is keep
Ground and ignition plus (alternatively the remote line
of the retrofit radio).
Important instructions!
1. The fader function (fade from front to
rear speakers) works with the
Unfortunately no more adapters.
The balance control (left/right) works
furthermore.
2. Check before buying whether the original amplifier
turns on. Because in some vehicles switches
this only via Can-Bus signals and not with one
normal remote line.
In this case you also need a CAN bus
Adapter that switches on the amplifier.
We also have this in our range for 79 euros.
Visit my ebay shop: acr-hof
If you have any questions about the product
have, so write us an Ebay message
or use the phone number or
Email address below in the
"Seller's Legal Information"
>
"complete information"
You can reach us at the following times:
Tuesday - Friday 10.00 a.m. - 6.00 p.m
Saturdays 10 a.m. - 2 p.m
DISCONTINUED WITH
Important note for customers outside the EU! Any applicable import duties, taxes and fees are not in the item price or den Shipping costs included. The buyer is responsible for this responsible for fees. If you have an amplifier in your vehicle ex works have installed which is controlled via fiber optic cable, so you can connect it to an aftermarket radio with the adapter To do this, the front loudspeaker outputs are converted into a Fiber optic signal converted and forwarded to the amplifier On the adapter itself, all you have to do is keep Ground and ignition plus (alternatively the remote line The balance control (left/right) works furthermore. 2. Check before buying whether the original amplifier this only via Can-Bus signals and not with one We also have this in our range for 79 euros